1. Mauro F.; Molina I.; García-Abril A.; Valbuena R.; Ayuga-Téllez E. (2016). Remote sensing estimates and measures of uncertainty for forest variables at different aggregation levels. Environmetrics, in press.

2. Ramírez-Gómez A. (2016). Research Needs on Biomass Characterization to Prevent Handling Problems and Hazards in Industry. Particulate Science and Technology: An International Jornal, in press.

3. Louetri L.; Djeghaba K.; Gallego E. (2016). Numerical simulation of reinforcement in steel slender silos having concentric hopper with carbon fiber-reinforced polymer composites (study of the silos filling). European Journal of Environmental and Civil Engineering, in press.

4. Barletta D.; Berry R. J.; Larsson S. H.; Lestander T. A.; Poletto M.; Ramírez-Gómez A. (2015). Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes. Fuel Processing Technology, 138: 540-554

5. Gallego E.; Ruiz A.; Aguado P. (2015). Simulation of silo filling and discharge using ANSYS and comparison with experimental data. Computers and Electronics in Agriculture, 118: 281-289.

6. Markauskas D.; Ramírez-Gómez A.; Kačianauskas R.; Zdancevičius E. (2015). Maize grain shape approaches for DEM modelling. Computers and Electronics in Agriculture, 118: 247-258.

7. Fuentes J. M.; López-Sánchez M.; García A. I.; Ayuga F. (2015). Public abattoirs in Spain: History, construction characteristics and the possibility of their reuse. Journal of Cultural Heritage 16 (5): 632-639.

8. Medic-Pejic L.; Fernandez-Añez N.; García-Torrent J.; Ramírez-Gomez A. (2015). Determination of spontaneous combustion of thermally dried sewage sludge. Journal of Loss Prevention in the Process Industries 36: 352-357.

9. Grima-Olmedo C.; Butragueño-Muñoz J. A.; Ramírez-Gómez A.; Gómez-Limón D. (2015). Revisión de los equipos de decantación para estériles de mina: del espesador convencional al de cono profundo para la producción de pasta. Dyna, 90 (4): 359-365

10. Ayuga F. (2015). Present and future of the numerical methods in buildings and infrastructures areas of Biosystems engineering. Journal of Agricultural Engineering, 46 (1):1-12.

11. Garcia-Garcia, M. J.; Ayuga-Téllez, E.; Gonzalez-Garcia, C.; Grande-Ortiz, M. D. A. (2014). Integration of Teaching Activities for Training in Research Skills in Technical University of Madrid. International Journal of Engineering Education B, 30: 1613-1620.

12. Perdigones, A.; Gallego, E.; Garcia, N.; Fernandez, P.; Pérez-Martin, E.; Del Cerro, J. (2014). Physics and Mathematics in the Engineering Curriculum: Correlation with Applied Subjects. International Journal of Engineering Education A, 30: 1509-1521.

13. Alonso-Marroquin F., Busch J., Chiew C., Lozano C., Ramírez-Gómez A. (2014). Simulation of counterflow pedestrian dynamics using spheropolygons. Physical Review E, 90: 063305

14. Grima-Olmedo C., Ramírez-Gómez Á., Alcalde-Cartagena R. (2014). Energetic performance of landfill and digester biogas in a domestic cooker. Applied Energy, 134: 301-308.

15. Díaz-Palacios-Sisternes S., Ayuga F., García A. I. (2014). A method for detecting and describing land use transformations: an examination of Madrid's southern urban-rural gradient between 1990 and 2006. Cities, 40: 99-110.

16. Ayuga-Téllez E., Mauro-Gutiérrez F., García-Abril A., González-García C., Martínez-Falero J. E. (2014). Comparison of estimation methods to obtain ideal distribution of forest tree height. Computers and Electronics in Agriculture, 108:191-199.

17. Ramírez-Gómez Á., Gallego E., Fuentes J.M., González-Montellano C., Porras-Prieto C.J., Ayuga F. (2014). Full-scale tests to measure stresses and vertical displacements in an 18.34 m-diameter agricultural steel silo roof. Computers and Electronics in Agriculture, 106:56-65.

18. Grima-Olmedo C., Ramírez-Gómez Á., Medic-Pejic L., García-Torrent J. (2014). The penetration of respiratory protective devices by respirable solid particles. Journal of Aerosol Science, Volume 74: 36-41.

19. Torreggiani D.; Benni S.; García A. I.; Ayuga F.; Tassinari P. (2014). Farm winery layout design: size analysis of base spatial units over an Italian study area. Transactions of ASABE, 57(2): 625-633

20. Briassoulis, D., Gallego, E., Pantaleo, A. M., Holden, N. M., Owende, P., Ting, K.C., Mallikarjunan, K. (2014). The "threads" of biosystems engineering. Transactions of ASABE, 57(1): 307-330.

21. González-Montellano, C., Báguena E. M., Ramírez-Gómez, A., Barreiro, P. (2014). Discrete element analysis for the assessment of the accuracy of load cell-based dynamic weighing systems in grape harvesters under different ground conditions. Computers and Electronics in Agriculture, 100:13-23

22. Ramírez A., Gallego E., Fuentes J. M., González-Montellano C., Ayuga F. (2014). Values for particle-scale properties of biomass briquettes made from agroforestry residues. Particuology, 12 (1): 100-106

23. Alonso-Marroquín, F., Ramírez-Gómez, A., González-Montellano, C., Balaam, N., Hanaor, D. A. H., Flores-Johnson, E. A., Gan, Y., Chen, S., Shen, L. (2013). Experimental and numerical determination of mechanical properties of polygonal wood particles and their flow analysis in silos. Granular Matter, 15 (6): 811-826

24. Moya M., Aguado P.J., Ayuga F. (2013). Mechanical properties of some granular agricultural materials used in silo design. International Agrophysics, 27, 181-193

25. Ortuño Pérez S. F., Garcia-Robredo F., Ayuga Téllez E., Fullana Belda C. (2013). Effects of the crisis in the resin sector on the demography of rural municipalities in Spain. Forest Systems, 22 (1): 39-46

26. Vicente-Guillén J., Ayuga-Téllez E., Otero D., Chávez J. L., Ayuga F., García A.I. (2012). Performance of a Monthly Streamflow Prediction Model for Ungauged Watersheds in Spain. Water Resources Management, 26(13): 3767-3784

27. González-Montellano C., Fuentes J. M., Ayuga-Téllez E., Ayuga F. (2012). Determination of the mechanical properties of maize grains and olives required for use in DEM simulations. Journal of Food Engineering, 111(4): 553-562

28. Ares, R., Fuentes J. M., Gallego E., Ayuga F., García A.I. (2012). Use of the Labour-Intensive Method in the Repair of a Rural Road Serving an Indigenous Community in Jocotán (Guatemala). Science and Engineering Ethics, 18(2): 315-338

29. García-Torrent J., Ramírez-Gómez Á., Querol-Aragón E., Grima-Olmedo C., Medic-Pejic L. (2012). Determination of the risk of self-ignition of coals and biomass materials. Journal of Hazardous Materials, 213-214: 230-235

30. Grande-Ortiz M. A., Contato- Carol M. L., Ayuga-Téllez E. (2012). Methods of Tree Appraisal: A Review of Their Features and Application Possibilities. Arboriculture & Urban Forestry, 38(4): 130-140

31. González-Montellano C., Gallego E., Ramírez A., Ayuga F. (2012). Three dimensional discrete element models for simulating the filling and emptying of silos: analysis of numerical results. Computers & Chemical Engineering, 40: 22-32

32. González-Montellano C., Ramírez A., Fuentes J. M., Ayuga F. (2012). Numerical effects derived from en masse filling of agricultural silos in DEM simulations. Computers and Electronics in Agriculture, 81 (1):113-123

33. Gallego E., Fuentes J. M., Ramírez A., Ayuga F. (2011). Computer simulation of complex-shaped formworks using three-dimensional numerical models. Automation in Construction, 20 (7): 830-836

34. González-Montellano C., Ramírez A., Gallego E., Ayuga F. (2011). Validation and experimental calibration of 3D discrete element models for the simulation of the discharge flow in silo. Chemical Engineering Science, 66(21): 5116-5126

35. Ramírez A., Ayuga-Téllez E., Gallego E., Fuentes J. M., García A.I. (2011). A simplified model to assess landscape quality from rural roads in Spain. Agriculture, Ecosystems & Environment, 142(3-4): 205-212

36. Fuentes J. M., García A.I., Ayuga-Téllez E., Ayuga F. (2011). The development of the flour-milling industry in Spain: analysis of its historical evolution and architectural legacy. Journal of Historical Geography, 37(2): 232-241.

37. Moya M.; Gallego E.; García A.I.; Ayuga F. (2011). A proposed methodology for the management of low-volume roads in Spain. The Baltic Journal of Road and Bridge Engineering, 6(3): 153-162

38. Ayuga-Téllez E., Contato- Carol M. L., González C., Grande-Ortiz M. A., Velázquez J. (2011). Applying Multivariate Data Analysis as Objective Method for Calculating the Location Index for Use in Urban Tree Appraisal. Journal of Urban Planning and Development, 137(3): 230-238

39. Gallego E., González-Montellano C., Ramírez A., Ayuga F. (2011). A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls. Engineering Structures, 33(6): 1940-1954

40. González-Montellano C., Ayuga F., Ooi J. Y. (2011). Discrete element modeling of grain flow in a planar silo: influence of simulation parameters. Granular matter, 13(2): 149-158

41. Gallego E., Fuentes J. M., Ramírez A., Ayuga F. (2010). Design of tall formworks by a Finite Element Model. Journal of Construction Engineering and Management, 136 (7): 803-810

42. Ramírez A., Nielsen J., Ayuga F. (2010). Pressure Measurements in Steel Silos with Eccentric Hoppers. Powder Technology, 201 (1): 7-20

43. Fuentes J. M. (2010). Methodological bases for documenting and reusing vernacular farm architecture. Journal of Cultural Heritage, 11 (2): 119-129

44. Fuentes J. M., Gallego E., García A.I.; Ayuga F. (2010). New uses for old traditional farm buildings: The case of the underground wine cellars in Spain. Land Use Policy, 27 (3): 738-748

45. Gallego E., Rombach G. A., Neumann F., Ayuga F. (2010). Simulations of Granular Flow in Silos with Different Finite Element Programs: ANSYS vs. SILO. Transactions of the ASABE, 53(3): 819-829

46. Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 2: Validation for pressure measurements. Computers and Electronics in Agriculture 71 (1): 64-70

47. Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 1: Calibration and evaluation. Computers and Electronics in Agriculture 71 (1): 71-76

48. Ramírez, A; García-Torrent J., Tascón, A. (2010). Experimental determination of self-heating and self-ignition risks associated with the dusts of agricultural materials commonly stored in silos Journal of Hazardous Materials, 175 (1-3): 920-927

49. Ramírez A., Moya M., Ayuga F. (2009). Determination of the mechanical properties of powdered agricultural products and sugar. Particle & Particle Systems Characterization, 26 (4): 220-230

50. Tascón, A., Aguado P. J., Ramírez, A.. (2009). Dust explosion venting in silos: A comparison of standards NFPA 68 and EN 14491. Journal of Loss Prevention in the Process Industries 22 (2): 204–209

51. González-Montellano C., Ramírez A., Gallego, E., Ayuga F. (2009). On the steel cost of circular flat-bottomed silos designed using the Eurocodes. Structural Engineering and Mechanics, 33 (5): 561-572

52. Ramírez, A. García-Torrent J., Aguado P. J. (2009). Determination of parameters used to prevent ignition of stored materials and to protect against explosions in food industries, Journal of Hazardous Materials 168 (1): 115-120

53. Cañas I.; Ayuga E.; Ayuga F. (2009). A contribution to the assessment of scenic quality of landscapes based on preferences expressed by the public. Land Use Policy, 26 (4): 1173-1181.

54. Sánchez de Medina, A.; Ayuga, E.; Grande, M.A. & García Abril, A. (2008).Forestry alternatives to Navarran yield tables for beech (Fagus Sylvatica L.). Allgemeine Forst- und Jagdzeitung. 179 (12): 225-231

55. Gallego E.; Moya M.; Piniés M.; Ayuga F. (2008). Valuation of low volume roads in Spain. Part 2: Methodology validation. Biosystems Engineering 101 (1): 135-142

56. Gallego E.; Moya M.; García A.I.; Ayuga F. (2008). Valuation of low volume roads in Spain. Part 1: Methodology development. Biosystems Engineering 101 (1): 123-134

57. Contato-Carol, M. L.; Ayuga-Téllez, E.; Grande-Ortiz, M. A. (2008).A comparative analysis of methods for the valuation of urban trees in Santiago del Estero, Argentina. Spanish Journal of Agricultural Research 6(3): 341-352.

58. Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2008). Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper. Journal of Constructional Steel Research. 64 (4): 480-492

59. García, A. I.; Ayuga F. (2007). Reuse of abandoned buildings and the rural landscape: The situation in Spain. Transactions of the ASABE 50 (4): 1383-1394.

60. Gallego E., Fuentes J. M., Ramírez A., Navamuel B., Ayuga F. (2007). Cálculo de encofrados de gran altura mediante un modelo de elementos finitos: estudio paramétrico. Informes de la Construcción. 59 (505): 73-81.

61. Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2006). Simulation of the Filling Pressures of Cylindrical Steel Silos with Concentric and Eccentric Hoppers Using 3-Dimensional Finite Element Models. Transactions of the ASABE. 49 (6): 1881-1895.

62. Juan, A.; Moran J. M.; Guerra, M. I.; Couto, A.; Ayuga, F.; Aguado P. J. (2006). Establishing stress state of cylindrical metal silos using finite element method: Comparison with ENV 1993. Thin-Walled Structures 44 (11): 1192–1200.

63. Fuentes J. M.; Cañas, I. (2006). Subterranean wine cellars of Central-Spain (Ribera de Duero): An underground built heritage to preserve. Tunneling and Underground Space Technology. 21 (5): 475-484

64. Ayuga E.; Martín-Fernández A. J.; González-García, C.; Martínez-Falero, E. (2006). Estimation of non-parametric regression for dasometric measures. Journal of Applied Statistics 33 (8): 819-836

65. Vidal P.; Couto A.; Ayuga F.; Guaita M. (2006). Influence of hopper eccentricity on discharge of cylindrical mass flow silos with rigid walls. Journal of Engineering Mechanics. ASCE. 132 (9): 1026-1033.

66. Moya, M.; Guaita, M.; Aguado, P.; Ayuga F. (2006). Mechanical Properties of Granular Agricultural Materials, Part 2. Transactions of the ASABE, 49 (2): 479-489.

67. García, L.; Hernández, J.; Ayuga, F. (2006). Analysis of the materials and exterior texture of agro-industrial buildings: a photo-analytical approach to landscape integration. Landscape and Urban Planning. 74 (2): 110-124.

68. Vidal, P.; Guaita, M.; Ayuga, F. (2005). Discharge from cylindrical slender steel silos: finite element simulation and comparison with Eurocode 1. Transactions of the ASAE. 48 (6): 2315-2321.

69. Morán, J. M.; Juan, A.; Ayuga, F.; Robles, R.; Aguado P. (2005). Analysis of thermal load calculations in steel silos: a comparison of Eurocode 1, classical methods, and finite element methods. Transactions of the ASAE. 48 (4): 1483-1490.

70. Vidal, P.; Guaita, M.; Ayuga, F. (2005). Analysis of Dynamic Discharge Pressures in Cylindrical Slender Silos with a Flat Bottom or with a Hopper: Comparison with Eurocode. Biosystems Engineering, 91(3): 335-348.

71. Hernández-Blanco, J.; García-Moruno, L.; Ayuga, F. (2004). Integration methodologies for visual impact assessment of rural buildings by geographic information systems. Biosystems Engineering, 88 (2): 255-263.

72. Hernández-Blanco, J.; García-Moruno, L.; Ayuga, F. (2004). Assessment of the visual impact made on the landscape by new buildings: a methodology for site selection. Landscape and Urban Planning, 68 (1): 15-28.

73. García, L.; Hernández, J.; Ayuga, F. (2003). Analysis of the exterior colour of agroindustrial buildings: a computer aided approach to landscape integration. Journal of Environmental Management, 69 (1): 93-104.

74. Guaita M.; Couto, A.; Ayuga F. (2003). Numerical Simulation of Wall Pressure during Discharge of Granular Material from Cylindrical Silos with Eccentric Hoppers. Biosystems Engineering, 85 (1): 101–109.

75. Hernández, J.; García, L.; Morán, J.; Juan, A; Ayuga, F. (2003). Estimating visual perception of rural landscapes using GIS: the influence of vegetation. Journal of Food, Agriculture and Environment. 1 (1): 139-141.

76. Martínez, V.; García, A. I.; Ayuga F. (2002). Distributed routing techniques developed on GIS for generating synthetic unit hydrographs. Transactions of the ASAE, 45 (6): 1825-1834.

77. Moya, M.; Ayuga, F.; Guaita, M.; Aguado, P. (2002). Mechanical Properties of Granular Agricultural Materials. Transactions of the ASAE. 45 (5): 1569–1577.

78. Ayuga, F.; Guaita, M.; Aguado, P.; Couto, A. (2001). Discharge and the Eccentricity of the Hopper Influence on the Silo Wall Pressures. Journal of Engineering Mechanics. ASCE. 127 (10): 1067-1074.

79. Ayuga, F.; Guaita, M.; Aguado, P. (2001). Static and Dynamic Silo Loads using Finite Element Models. Journal of Agricultural Engineering Research. 78 (3): 299-308.

80. Ayuga-Téllez E.; Ayuga-Téllez C; González-García, C.; Martínez-Falero, E. (1997). Estimation of non-parametric regression in the analysis of the anti-inflammatory activity of diverse extracts of Sideritis foetens. Journal of Applied Statistics 24 (5): 559-572